Le blog du TViX

Hello, alors comment va notre petite communauté ? Oui je sais pas très bien, les dernières nouvelles étaient franchement mauvaises pour DViCO, mais gardez espoir, les indicateurs sont repassés au verts !

J'ai eu quelques infos de la société qui distribue en France la marque DViCO, il s'agit de NewCom Distribution.

Pour faire court et pour gagner un peu de temps, les infos que j'ai eu sont les mêmes que celles données par "Les Numériques", je vous invite donc à lire avec beaucoup d'attention l'article de Régis en cliquant sur l'image.

Donc Minevox, propriétaire de DViCO se recentre sur une partie de son activité, DViCO n'en faisant pas partie, la société est a vendre. Il y aurait déjà deux offres sérieuses de reprise et Minevox devrait se décider d'ici la fin du mois.

Alors attendez un peu avant de faire péter le Champomy mais vous le voyez les nouvelles sont meilleurs.

Allez DViCO, on se remet au travail et on nous sort rapidement un petit firmware pour les Xroid, ça rasurrera tout le monde.

Première mise à jour firmware pour le Xroid B1 mini ! Il s'agit même d'une double mise à jour puisqu'il faut installer le firmware 1.2.00 avant d'installer le 1.2.01, on ne peut pas passer directement au 1.2.01 si on a un firmware 1.1.xx

La procédure de mise à jour est bien expliqué mais personnellement impossible d'avoir quoi que se soit en mettant le firmware sur le disque dur interne, j'ai du passer par une clè USB.

Le fait que le Xroid B1 mini n'a pas d'afficheur est assez déstabilisant, on ne sait pas vraiment ou en est la mise à jour. Il faut se fier à la LED de facade, si elle clignotte bleu (après une phase rouge/bleu) c'est bon signe.

Pour ce qui est du firmware, il est identique au firmware du Xroid A1, et malheureusement on attend toujours le 24p !

Dear Customer,
We are about to release the new firmware Rev 1.2.01.
The major differences from last version (1.1.02) are Supporting Auto network disk and Upnp connection.

This is a guide of firmware updating.
[ How to upgrade firmware ]
* You need upgrade the 1.2.0 firmware in advance if current firmware is 1.1.x.

Please follow the steps below:
1) Copy the1.2.0 firmware files into the root of the TVIX hard drive or USB memory device. 
http://demod.dvico.com/Down/TViX_Xroid_B1mini_1.2.0.fwp
2) Press and hold the ‘POWER’ button for 5 seconds and firmware upgrade will be started.
3) While upgrading firmware, BLUE LED blinks on quickly.
4) The TViX will automatically reboot after the upgrade has been successfully finished.

After upgrading 1.2.0 firmware, please upgrade the 1.2.01 firmware
1) please copy 1.2.01 firmware in your internal hard disk or USB memory stick.
http://demod.dvico.com/Down/TViX_Xroid_B1mini_1.2.01.fwp
2) Boot TViX Xroid B1 mini and click TViX_Xroid_B1mini_1.2.01.fwp
3) The TViX will automatically reboot after the upgrade has been successfully finished.


Release Notes for Rev 1.2.01 since Rev 1.1.02

=============================================================

< Tip >
- Press Center Icon (Apps) to use installed applications or Android Applications.
- Press ‘MENU’ button to use variable functions in main screen, file browser or playing mode.

* If you dont connect HDMI receiver, Please dont change HD audio option (Stay this option to OFF) 

1. Supports Auto network disk settin
- Displays connected samba or NFS connection
- You can configure the network disk setting easily and scanned list will be saved.
- You can also use old manual setting in network disk.

< How to use auto network disk>
1) Select Auto Network Disk setting on the Setting-Network Setting on menu.
2) check Use NFS connection or Use Samba Connection. you can also check both.
3) check Always Scan
4) In device manager, Press Netdisk_NFS or Netdisk_Samba for network disk scanning.
while first scanning needs some time, next access will go directly the scanned network disk without re-scanning.
5) We recommend to uncheck ''''''''auto network disc" after first scanning, then next access will show already scanned network disk without rescanning.
* In case of using samba via NFS, you need to register admin account in NFS one time.

2. Fixed the problem that the Youtube was not worked at cover art mode.

3. Improved the GOTO issue in Upnp.

4. Fixed the problem that the MOVIE/MUSIC/PHOTO button was not worked at cover art mode.

5. Fixed the problem that some images were not output at cover art mode.

6. Registered TViX app remote on the App store.
- you can download and install the TViX app remote after searching ''''''''tvix'''''''' on the iphone app store now.
- This remote is supporting remote key and mouse control.

=============================================================

1. Supports Upnp network connectio
- Press MENU- device on the file list, you can select Upnp device.
- Upnp is not support external subtitle. to use external subtitle, please use NFS or samba connection.
- Some files are not supported trick play( Goto or FF) at this version, we''''''''ll improve it soon.

2. Supports the CUE playlist file(.APE, .flac)
- make same file name with .cue and .ape/.flac (ex: aaa.flac, aaa.cue)
- when playing this file, cue TILE is displayed instead of audio file name

3. Supports the APE music file format
- Supports the lossless APE music format.
- at this version, it will take some time to load APE format.

4. Fixed the problem that TV resolution was switched to 720P sometimes.

5. Supports TV OUT function
- If you can''''''''t see TV screen after booting, you must press the TV Out button on your remote controller repeatedly until you see the screen. 

6. Supports Korean virtual keyboard.
- You can insert Korean with remote or mouse.
- Change the language to Korean, you can toggle virtual keyboard between English and Korean.

7. Supports AZERTY keyboard for France.
- If you select the location to France, you can use virtual keyboard of AZERTY and wired/wireless AZERTY keyboard.

8. Registered TViX app remote on the Android market.
- you can download and install the TViX app remote after searching ''''''''tvix'''''''' on the Android Market.

9. Changes the default main screen and OSD color.

10. Changes the TViX Torrent location.
- you need install the TViX torrent application on the TViX Market.

11. Fixes the mosaic issue with some video files.

[ Known issues ]
- The File including special symbol such as ''''''''#,%" in its name or folder may not playback normally.
- There is known bug that some AVI files encoded with VBR may not audio out after FF or Goto.
- There is known bug that AVI files encoded with Some Super Fast AVI Muxer is not supported.

Firmware 1.2.00

Firmware 1.2.01

Nouveau firmware disponible pour le Xroid A1 (et le B1 aussi), version 1.2.00 (1.2.01 pour le B1, j'en reparle dans la soirée). Principale nouveauté, la connexion automatique des lecteurs réseaux et uPnP

.

Release Notes for Rev 1.2.00 since Rev 1.1.08
=============================================================
< Tip 
- Press Center Icon (Apps) to use installed applications or Android Applications.
- Press ‘MENU’ button to use variable functions in main screen, file browser or playing mode.

* If you don't connect HDMI receiver, Please don't change 'HD audio' option (Stay this option to OFF) 

1. Supports Auto network disk setting
- Displays connected samba or NFS connection.
- You can configure the network disk setting easily and scanned list will be saved.
- You can also use old manual setting in network disk.

< How to use auto network disk>
1) Select Auto Network Disk setting on the Setting-Network Setting on menu.
2) check Use NFS connection or Use Samba Connection. you can also check both.
3) check Always Scan
4) In device manager, Press 'Netdisk_NFS' or 'Netdisk_Samba' for network disk scanning. 
while first scanning needs some time, next access will go directly the scanned network disk without re-scanning. 
5) We recommend to uncheck 'auto network disc" after first scanning, then next access will show already scanned network disk without rescanning. 
* In case of using samba via NFS, you need to register admin account in NFS one time. 

2. Fixed the problem that the Youtube was not worked at cover art mode.

3. Improved the GOTO issue in Upnp.

4. Fixed the problem that the MOVIE/MUSIC/PHOTO button was not worked at cover art mode.

5. Fixed the problem that some images were not output at cover art mode.

6. Registered TViX app remote on the App store.
- you can download and install the TViX app remote after searching 'tvix' on the iphone app store now.
- This remote is supporting remote key and mouse control.

 Tuto mise à jour firmware pour le Xroid A1